Skip to content
vossoframe workshop since 1984
Menu

Custom frames for architects and interior designers

We turn the sofa, armchair, banquette or chair you designed for your project into a frame, one to one. New designs start with a sample, and production waits for your approval. Load-bearing parts are solid beech and hornbeam, with no size limits.

What you can send

  • A technical drawing (DWG, DXF or PDF) is the fastest and most accurate.
  • Without a drawing, a dimensioned sketch or reference photos.
  • Quantities for the project and the opening or delivery date.
  • Upholstery allowance: are your dimensions for the finished piece or the bare frame?

How to measure

Sofa frame measurement diagram Side view with overall height, seat height, arm height, seat depth and overall depth; front view with overall width and seat width between the arms. Side view Front view Overall height Seat height Arm height Seat depth Overall depth Seat width Overall width
We need at least these seven dimensions to quote. For sets, give them for each piece (3-, 2- and 1-seater).
  1. Overall width: outside of one arm to the outside of the other
  2. Overall depth: front edge to the back of the frame
  3. Overall height: floor to the top of the back
  4. Seat height: floor to the seat surface
  5. Seat depth: front edge of the seat to the back rest
  6. Seat width: between the inside faces of the arms
  7. Arm height: floor to the top of the arm

What we look at in custom designs

Slim arms, floating backs, unusual angles and long bodies need the joinery planned before production. Curved and carved parts are cut from solid beech. Designs that need CNC cutting can also be made.

How it works

  1. Drawing and sizes

    You send a drawing or photos, dimensions, quantity and target date on WhatsApp or by phone.

  2. Quote and lead time

    Price and a delivery date in working days, in writing.

  3. 50% deposit

    The order is confirmed with a deposit and scheduled.

  4. Sample and production

    New designs start with a sample; production follows your approval.

  5. Live video approval

    Before shipping, we show you your frames live on a video call.

  6. 50% balance and shipping

    You pay the balance after approval; we pack and ship the way you choose.

Materials and joinery

Load-bearing partsSolid beech and hornbeam
PanelsMDF and plywood (back panels, seat boards and other non-load-bearing surfaces)
JoineryDowels, mortise and tenon, glue, screws and staples, chosen for the load on each joint. Details
DimensionsNo standard sizes imposed: seat height, depth and width are built to your drawing.
Quality controlEvery frame checked for dimensions and symmetry; production runs checked against the approved sample
Minimum orderNone: from a single sample to full production
PackingStretch film and cardboard

Your design stays yours

Frames made for your project are for you only. We never show them to other companies or add them to our catalogue.

Send us your drawing

DWG, PDF or a dimensioned sketch, with quantities and the delivery date.

Request a quote Message us on WhatsApp